Contact Us
Contact Info
- 8613791173593
- valvetch3@gmail.com
Fill out the form below and we will
contact you as soon as possible!
Body material: Carbon steel, Stainless steel, Alloy steel ,Monel, Duplex, Inconel,etc
Size range(s):1/2″~8″
End Connection: RF, RTJ,BW, NPT,SW
Pressure rating: Class150 – Class2500
Working temperature: -46℃ – +200℃
Operation: handwheel, worm gear, electric, etc
Description
The inlet and outlet channels of the angle stop valve are not in the same direction but form 90-degree right angles so that the medium passing through the valve will change the flow direction, and thus a certain pressure drop will occur. The greatest advantage of the angle stop valve is that the valve can be installed at the corner of the pipeline system, which not only saves a 90-degree elbow but also facilitates operation.
Technical specification
Design & manufacturing standard as per ASME B16.34/API 6D/BS EN ISO 17292(BS5351)
Face-to-face standard as per ASME B16.10
Fanged ends standard as per ASME B16.5/ASME B 16.25/ASME B 16.11/ASME B 1.20.1
Testing & inspection standard as per API598/BS EN 12266(BS6755)
Product Range
Body material: Carbon steel, Stainless steel, Alloy steel,Monel, Duplex, Inconel, etc
Size range(s):1/2″~8″
End Connection: RF, RTJ,BW, NPT,SW
Pressure rating: Class150 – Class2 500
Working temperature: -46℃ – +200℃
Operation: handwheel, worm gear, electric, etc
Design Features
Outside Stem and Yoke Bolt Bonnet
Angle Body Design/Bellow Seal Available
Low Emission
The Inner Cavity is Smooth Transition Without Cutoff Deposition
Fill out the form below and we will
contact you as soon as possible!
industrial valve more than 20 years experience since 1999
we will contact you within 24 hours, pls pay attention to your email